Razor - Lite Cut 5 Glove
Anti Impact Cut Resistant 5
HPPE knit lining with Glass fibre,
Chrome Cow Leather stitched palm
Suitable for sharp objects heavy duty applications.
USA Hand Protection Standards ANSI/ISEA 105-2011
European Hand Protection Standards
Protective Gloves : General Requirements
EN 420: 2003 + A1 2009
This standard defines the general requirements for glove design and construction,innocuousness, cleaning instructions, electrostatic properties, sizing, dexterity,water vapour transmission and absorption along with marking and information.
Protective Gloves Against Thermal Risks (Heat and/or Fire)
EN 407: 2004
This standard specifies thermal performance for protective gloves against heat and/or fire. The heat and flame pictogram is accompanied by a 6 digit number.
Protective Gloves: Mechanical Vibration and Shock
EN 10819: 1996
This European Standard specifies a method for the laboratory measurement, the data analysis and reporting of the vibration transmissibility of gloves in terms of vibration transmission from a handle to the palm of the hand in the frequency range from 31.5 Hz to 1250 Hz. The standard is intended to define a screening test for the vibration transmission through gloves.
Protective Gloves for Welders
EN 12477: 2001
This European Standard specifies requirements and test methods for protective gloves for use in manual metal welding, cutting and allied processes. According to their performance, protective gloves for welders are classified into two types.
Type A: Lower dexterity (with higher other performance).
Type B: Higher dexterity (with lower other performance).
Protective Clothing: Electrostatic Properties
This European Standard specifies a test method for materials intended to be used in the manufacturing of electrostatic dissipative protective clothing (or gloves) to avoid incendiary discharge. This test method is not applicable for materials to be used in the manufacturing of protection clothing or gloves against mains voltages.
Protective Gloves : Against Chemicals And Micro-Organisms
EN 374-1: 2003
This European standard specifies the requirements for gloves to protect the user against chemicals and/or microorganisms and defines terms to be used.
This European Standard specifies a test method for the penetration resistance of gloves that protect against chemicals and/or micro-organisms.
EN 374-3: 2003
This European Standard specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact.
GT Safety Hand-wear
Hundreds of safety gloves styles offer the complete Hand Protection Range.
ⵠ IMPACT: The latest development in glove technology, specially designed gloves to provide protection to hands from impact hazards. These Anti-Impact gloves utilize the latest research in materials technology in order to absorb a maximum amount of force from impacts.
ⵠ CHEM: Working environments using hazardous chemicals and substances can be very harmful to workers and the correct protection is a must. GT Safety supplies a range of gloves which are fully tested and complied to protect from a range of chemicals.
ⵠ THERM: When cold thermal hazards are present, the hands’ motor skills can be greatly reduced, this leads to increased risks of accidents and injury. Specially designed thermal protective gloves are available to combat these hazardous environments.
ⵠ WORK: This GT Safety Gloves range is a combination of highly specialized gloves which have been designed for very specific tasks. The use of these gloves with the right task will preform better than any other glove which has been designed for more general purposes.
ⵠ SHARP CUT: Hand injury is one of the most frequent types of accident reported in the working environment, with cuts and lacerations the biggest concern in this area. GT Safety Gloves range of cut resistant gloves gives varying degrees of protection depending on what level is required.
ⵠ MERCHANIC: One of the best selling ranges of gloves globally, the Drivers and Riggers collection houses a large selection of work gloves made from premium genuine and synthetic leather. This affords the user the best in breathability, durability, comfort and dexterity.
ⵠ GRIP: The General Handling and Grip Glove category is still one of the most popular collections within GT' Hand Protection Range. A carefully selected range of coatings, including Latex, Nitrile, Polyurethane and PVC, provides a broad range of styles suited to a diverse range of tasks.
ⵠ WELD: Higher levels of protection are needed when a worker is dealing with extremely hot temperatures and heated materials. The GT Safety Weld range has an expanding selection of hand protection solutions suitable for all welding and thermal risk.
ISO 9001: 2015 CERTIFIED COMPANY