|Shell Material||Harness material||Liner Suspension adjustment||Special Characteristic||Temperatures||Electical Properties (440Vac)||Lateral Deformation|
|Super fiber glass||Nylon (textile)||wheel ratchet||•||Anti-flame||-10ºC/+50ºC||440 Vac||Excellent √|
Comfortable padding hard hats
Light weight shell helmet
Helmet color available: White
Pr-Assembled or Separately(shell-inner) in same carton
EN 397:2012Industrial Safety Helmets
Impact: Energy spread to head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high.
Penetration: The tip of the test mass used (3 kg from 1 m height) must not come into contact with the skull.
Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.
Impact and penetration tests are performed at room temperature, at +50ºC and at -10ºC.
Resistance at extreme temperatures: testing impact and penetration are performed at +150ºC, at -20ºC or -30ºC temperatures.
Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac.
Lateral deformation:Protects against lateral compression. The maximum deformation of the helmets should be ≤ 40 mm (LD).
Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM).
ISO 9001: 2015 CERTIFIED COMPANY