Home / Products / Safety Mask / Full and Half Mask / Half Mask Filter Respirator G470

Half Mask Filter Respirator G470

Filter mask cartridge respirator

High quality silicone material, to ensure no allergic skin reaction or irritation.

Flexible cushion section at the nose and chin gives more secure seal in the most critical area.

Newly harness system with neck buckle provides fast and easy fitting.

Universal size with wide face-seal for efficient fit, large diameter valves create low breathing resistance.

Bayonet type connector:

The loading and unloading of the cartridge is more convenient and quick.

The outer silicone ring makes the cartridge more sealed.

Use with 7000 series A/B/E/K cartridges.

Features

More Features Introduction For mask G470:

• ABS filter holders

• Manufactured from a durable yet soft non allergic TPE material

• Sweat port on the face piece for hot and humid environments

• Harness connected to mask to prevent marking users face.

• Ergonomic shape for comfort and fit.

• Frontal exhalation valve.

Packing:

One pieces in a color box, then 40 pieces put in carton.

Carton size 67x28x34cm, 8/6kgs.

Important: Reading for RESPIRATORY PROTECTION

To choose a proper mask protection equipment, firstly identify the environment hazard from Dust, Mist, metal Fumes and Gas or Vapors.

Dust = Solid particles of several sizes generated by crushing solid materials.

Mist = Particles of evaporated liquid (water or organic basis.

Fumes = Small size particles of evaporated or melted solids, generally coming from

combustion.

Gas & Vapors = Substances that are normally airborne. Could be fluid generated by the passage from liquid or solid status to airborne, through evaporation or boiling.

Industrial Safety Mask Respirator G401

Disposable mask respirators are most effective when there is a good seal between the edges of the respirator and the face. The instant this seal is broken, protection is compromised as contaminated air can leak in through any gaps.

Standard	FFP1	FFP2	FFP3
% Min of filtration	80%	94%	99%
Total InwardLeakage (TIL)	22%	8%	2%
Nominal ProtectionFactor (NPF)	4,5 x TLV	12,5 x TLV	50 x TLV
Assigned ProtectionValue (APV)	4 x TLV	10 x TLV	20 x TLV
Protect From ★★	non-toxic dust and/or water-bases aerosols	slightly toxic or irritating solid aerosols and / or liquids.	solid aerosols and/or liquids listed as toxic

G.T. Safety Mask Respirator

GT Mask PPE range apply the latest updated standards, to offer the highest level of protection. Moreover, comfortable and light-weight ensure a pleasant wear even for long hours of use.

Your safety is our mission!

Our safety mask include of Regular industrial dust mask, carbon & valved face mask, filtered Full Face Masks and Half Masks, all is designed to offer the most comfortable and best fitting product. A user-friendly range with interchangeable filters, fitting with many different models of our full face and half face masks. Breathe safer and easier with GT Safety!

Type A: Application Organic Vapors and Gases with a boiling point of 65C and above (solvents and hydrocarbons).

Type B: Application Inorganic Vapors and Gases (excluding Carbon Dioxide/Monoxide)

Type E: Application Sulphur Dioxide and other Acidic Vapors and Gases .

Type K: Application Ammonia and its Organic Ammonia Derivatives Vapours and Gases .

Type ABEK: Application Combination Filter (all of the above)

Type P: Application P. Dust/Particle

EN 149: 2001 +A1:2009 Respiratory Protective Devices

- Filtering half masks to protect against particles

FFP1, FFP2, FFP3

NIOSH National Institute for Occupational Safety

- American Standard for filtering facial masks.

NIOSH N95: Filter at least 95% of the particles suspended in the air.

NIOSH N99: Filter at least 99% of the particles

suspended in the air.

AS/NZS:1716 - Australia standard for face masks.

DS2 - Japan standard for face masks.

KN90/95 - China standard for face masks.

KF90/94 - Korea standard for face mask.

EN 136: 1998 Respiratory Protective Devices - Full Face Masks.

- This European Standard specifies minimum requirements for full face masks for respiratory protective devices.

EN 140: 1998 Respiratory Protective Devices - Half Masks and Quarter Masks.

- This European Standard specifies minimum requirements for half masks and quarter masks for use as part of respiratory protective devices, except escape apparatus and diving apparatus.

EN 14387: 2004 Respiratory Protective Devices - Gas Filter(s) And Combined Filter(s).

- This European Standard refers to gas filters and combined filters for use as components in unassisted respiratory protective devices.

EN 143: 2000 Respiratory Protective Devices - Particle Filters

- This European Standard specifies particle filters for use as components in unassisted respiratory protective devices with the exception of escape apparatus and filtering face pieces.

Products List