Wholesale Industrial Safety Helmet G103

Comply with CE Standard: EN397

Function: anti-puncture, anti-shock

Liner cradle harness system: 4-point, 6-point

Headband size range: 53-61cm

With chinstrap, With sweatband.

Share:

Features

Shell MaterialHarness MaterialLiner Suspension AdjustmentVentilationTemperatureElectical Properties (440Vac)Electrical Insulation(1000Vac/1500Vdc)
PEPolyamide(textile)wheel ratchet-10ºC/+50ºC

press plug
buckle ratchet


Comfortable padding hard hats

Light weight shell helmet


Packing:

Pre-Assembled or Separately in same carton

50pcs/52x46x55cm, 16/15kgs.


EN 397:2012 Industrial Safety Helmets

Mandatory tests:

Impact: Energy spread to head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high.

Penetration: The tip of the test mass used (3 kg from 1 m height) must not come into contact with the skull.

Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.

Impact and penetration tests are performed at room temperature, at +50ºC and at -10ºC.


Optional tests:

Resistance at extreme temperatures: testing impact and penetration are performed at +150ºC, at -20ºC or -30ºC temperatures.

Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac.

Lateral deformation: Protects against lateral compression. The maximum deformation of the helmets should be ≤ 40 mm (LD).

Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM).

GRACE TOP INDUSTRY CO., LTD.

GRACE TOP INDUSTRY CO., LTD. ISO 9001: 2015 CERTIFIED COMPANY