Wholesale Industrial Safety Helmet Brim Sun Visor Shade G195

Function: prevent workers from direct sunlight.

Usage: cover it on the safety helmet

Material: PE and pure cotton

Features: soft and comfortable with neck flap.

Size: width 420mm x Length 445mm

Color: White, Orange, Green, Blue

Features

Packing:

one piece pack in a poly bag. 100pcs in a carton.

100pcs/52x46x55cm, 16/15kgs.

Applications: Construction site, Farm, Open mine pit, Oil filed

Wholesale Industrial Safety Helmet Brim Sun Visor Shade G195

EN 397:2012 Industrial Safety Helmets

Mandatory tests:

Impact: Energy spread to head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high.

Penetration: The tip of the test mass used (3 kg from 1 m height) must not come into contact with the skull.

Flammability: The helmet is exposed to a flame and it must not burn with flame emission more than 5 seconds after removal of the flame.

Impact and penetration tests are performed at room temperature, at +50ºC and at -10ºC.

Optional tests:

Resistance at extreme temperatures: testing impact and penetration are performed at +150ºC, at -20ºC or -30ºC temperatures.

Electrical properties: Protects against a short accidental contact with electric leads under voltage up to 440 Vac.

Lateral deformation: Protects against lateral compression. The maximum deformation of the helmets should be ≤ 40 mm (LD).

Molten metal splashes: The helmet is not deformed or penetrated by splashes of molten metal (MM).